Tuesday, April 30, 2013

Making the nose block stick

 Gene Cooper getting the fit just right to make it stick
Nice result the blue tint Agave
cooperfishcalendar.com/blog

Monday, April 29, 2013

The Flounder ride report

James from Kiri Surf Craft in Warrnambool - Victoria has just finished an interesting board he calls the Flounder. He sent some shots and I asked him to send a ride report when could.

"Disclaimer: It had been over a week since my last surf ? so I was stoked just to be in the water. It was a perfect day for alaias ? head high, glassy, hollow and fast peeling waves. I have been dreaming about this board and how it would work for months and I had visualised every line I could ever hope to draw on a wave long before I ever paddled it out.

But seriously it was SUPER fun! I didn?t really have too many opportunities to test it on my backhand (I struggle on my backhand with alaias, in fact I normally choose to ride rights on my knees), but for the couple of rights that I did get, I was happy to be able to take off and hold a line and even pull a little floater.

On my forehand it was crazy good. The Flounder held its line so well, had heaps of speed and glide and doing the LaLa (a kinda vertical climb and slide in the pocket of the wave) was a lot easier to control.

Freshly oiled boards tend to feel fast at first and this was no exception, but this board also felt different, the hold and control through the bottom turn as I set my line was not something I had felt before.

On my third wave despite my best efforts to paddle wide, when I took off I was still about 12 ft behind the peak, but it was a small day with long waits between sets so I thought I?d have a go. I took off fairly early and immediately pulled the Flounder into trim setting a fairly high line angling down just a touch. The lip hadn?t quite folded over as I approached the peak. Just as the Flounder reached the bottom of the wave and I straightened up, the lip folder over my head and for the next few moments I was locked into a perfect little barrel travelling really fast and really smooth across the glassy wave. These moments are rare in my surfing life, and tragically I often slip out at this point on the traditional alaias, but not with the Flounder, this time the Flounder held its line perfectly and even seemed to accelerate as I tried to pull up the wave a little. It was all over in another second or two as the close out section approached I tried to squeeze out at the last minute as the wave crunched shut. I lost it at the last moment getting clipped, but I had all that I needed. This strange looking board worked even better than I had expected.

More photos and vids check out kirisurfcraft.blogspot.com.au

Thanks to all the other wooden board and finless builders who have posted their stuff. Its a real inspiration to see so many other guys doing their own shapes and designs. Keep it up! I'm super keen to make it to the next wooden board day!"





Vince Wooden Surfboards Bali



Rick van Halsema from Vince Surfboards in Bali sent me these pics of some of the boards that they build. 
 They plant and grow their own Balsa to create a very sustainable board building process.
As you can see they build a wide range of designs
Vince Surfboards




Sunday, April 28, 2013

The pull of vacuum

 It is  quite amazing how much curve you can pull with the vacuum bagging process. This is a 3mm skin of Paulownia on the bottom of a board I worked on over the weekend.
 This is the tail of a 4ft 8" x 17" Slimmons on the way.
4ft 4" x 22" Simmons in the bag. 3 in a day gives me plenty to work on in the coming weeks laminating rails.

Finless fun...

Good Woodz from Bryce Young on Vimeo.

Saturday, April 20, 2013

Foam and wood

 New Zealand shaper Roger Hall is a master at whatever he puts his hand to. His current passion is revisiting the Hot Curl model and ramping it up with more than a modern twist.
 These boards are finless and the wood adds the weight to help hold the tail into the power of the wave.
 As you can see it is a pretty solid lump of wood , but not just one piece. Roger loves to laminate and mix up the timbers he uses.

 Not only is it very hard to work with wood and foam together due to the differences in densities but he has so many different timbers that vary as well to make it even harder. And this is all hanging off the end of the foam. A true test of anyones skills. But as you can see not only is it a great design with the flowing lines of the board enhanced by the beautiful timber.
 Hands of the master.

 Form and function


 Who do you know that would cut and glue up 7 stringers and foam like this. I have seen him do 13.
Great shots from Mike C. Lets hope Roger can make it to the Wooden board day this year.

Friday, April 19, 2013

Mixing it up.

 From James at : kirisurfcraft.blogspot.com.au   " Here is my latest board - I've called it the Flounder.

The Flounder is one strange fish. Should be a blast to ride though.

The Flounder is inspired by Tom and John Wegener. It is a combination of my parabolic alaia, my traditional alaia and mini simmons hybrid. Here is the Flounder and its cousin the Alaia Hybrid. Both about to be branded and oiled."

Looks like some interesting craft with lots going on and great to see James experimenting. Will wait to hear how they go. Alaia's are not easy to ride and this is surely mixing it up. Nice one James.

Sunday, April 14, 2013

Berlin build by Jan Dressler

 This is a board that Jan Dressler built in his apartment in the middle of Berlin. This is a wave SUP that is Paulownia vacuum bagged over EPS and lanolin finish. " This July the board will travel with me to Sylt a small island on the boarder of Germany and Denmark. "

" Here you can see a slight sort of dent in the rail. This happened very early when I was trying to get a clean outline out of a vertically glued up blank. As I hadn't found a supplier for 3000mm plus EPS blanks of the right density I glued up 1000x500x100mm pieces. The naturally harder glue lines crossing the foam  outline made impossible for me to keep it flawless while shaping."
 "Here's another example in the very tail section. (Pls note the Elu planer. It is a marvelous alternative to the notorious Skill 100 for much less money and 240V. Similarly rare though."
 Bagging the deck.
 Nice touch with a small ebony tail block
" Grant please meet Anita. She's my first one and designed as a paddleable blend between a flatwater cruiser, a floating taning plattform and a '65 Riva Super Florida. The hollow non laminated Strip and Feather construction is quite leaky but everybody loves her.

Jan and I had been in touch on and off throughout last year and at Christmas he came out to Australia with his wife and twin 5 year old boys. They travelled from Melbourne to the Gold Coast in a camper van. I met up with them for a day surfing in Byron Bay and then they stayed with us here on the Gold Coast before heading out of Australia. Jan works in the film and television industry and loves his surfing.